DÉTECTEUR SAN FIL PIR AVEC MESURE DE L'INTENSITÉ LUMINEUSE ATLO-AC-HW4A-TUYA Wi-Fi, Tuya Smart

Le capteur infrarouge passif numérique pour le montage au plafond.

L'appareil peut fonctionner avec l'application Tuya Smart pour les dispositifs mobiles.

Tuya est une plateforme de domotique internationale qui relie des milliers de produits développés par différents fabricants. Le système peut prendre en charge tous les protocoles de communication les plus courants tels que Wi-Fi, Zigbee, Bluetooth.

In the Tuya Smart application for the wireless PIR detector, there are two states: "Human status" (human presence) and "No one state" (state without human presence). These states inform about the detection or lack of movement in the sensor's coverage zone: "Human status" (human presence) - if active, it means that the detector has detected human movement and a notification is sent to the Tuya application. If the detector does not detect any movement after 40 seconds, it changes to "No one state" (state without human presence), displaying the "No one came" status in the application. This state lasts until the detector detects movement, which causes the switch to the "Human status" state (human presence). It is incorrect to test the detector and the application immediately after startup and configuration. The correct way is to leave the detector's detection area for at least 50 seconds and return to testing.

After the status changes, the time to connect to the Wi-Fi network is 5 seconds.