Sprache:Български Český Dansk Deutsch Eesti Ελληνικά English Español Français Italiano Latviešu Lietuvių Magyar Nederlands Polski Português Pусский Română Slovenski Slovenský Suomi Svenska
Währung:1 AUD - 2.5760 PLN 1 CAD - 2.8126 PLN 1 CHF - 4.2837 PLN 1 CZK - 0.1654 PLN 1 DKK - 0.5583 PLN 1 EUR - 4.1644 PLN 1 GBP - 4.9143 PLN 1 HUF - 0.0105 PLN 1 NOK - 0.3644 PLN 1 PLN - 1.0000 PLN 1 SEK - 0.3653 PLN 1 USD - 3.9110 PLN
Menü Empfohlener Artikel
Dämpfung der Lichtwellenleiter-Faser
Top
Alarme Satel BE WAVE
Code: SMART-HUB-PLUS
STEUERUNG DES FUNKSYSTEMS SMART-HUB-PLUS BE WAVE SATEL
BESCHREIBUNG The SMART-HUB-PLUS controller is the main device of the BE WAVE system. Enables a wide range of system functions, both automation and security related. The SMART-HUB-PLUS manages the operation of all BE WAVE system devices, which can be connected up to 128 in a single installation.
The BE WAVE application is dedicated to management. Das einfache und intuitive Menü macht die Bedienung des Systems zur einfachen und offensichtlichen Sache. The free BE WAVE application will send a notification to your phone when the sensors detect an event, and you have control of the device at any time, no matter where you are - all you need is Internet access and a smartphone. In the event of an Internet outage, SMART-HUB-PLUS can also operate in the local mode, in which case it will broadcast the WiFi you need to connect to in order to control your system. The SMART-HUB-PLUS controller is additionally equipped with a telephone module, so that it can also communicate via 2G, 4G mobile networks in case of lack of access to Internet infrastructure. Slots for 2 SIM cards allow you to fit cards from 2 different operators (automatic switching when the signal of one of the networks is lost).
The SMART-HUB-PLUS built-in wireless system controller uses proven ABAX 2 technology to communicate between devices, providing safe and secure communication, long range, and advanced power management mechanisms to extend the devices' operating time on a single battery.
The BE WAVE System is a family of unique wireless devices, bringing smart solutions to your home, performing home automation functions, protection against intruders, analysis of sensor readings and detection and response to events.
SPEZIFIKATION
Anwendung :
BE WAVE System
LAN Port :
1 x Ethernet RJ45
Drahtloskommunikation :
ABAX2 : 868.0 MHz ... 868.6 MHz, WiFi : 2.4 GHz IEEE 802.11 b/g/n, 5 GHz IEEE 802.11 a/n, 4G LTE, 2G GSM
Funk-Kommunikationsreichweite (in offenem Gelände) :
ABAX2 : < 1100 m
LED Lämpchen :
System / Status
Ereignisspeicher :
5000
Zahl der bedienten Geräte :
128
Anzahl der Benutzer :
50
Speicherkarten-Slot :
microSD - 32 GB im Set
SIM Karten-Steckplatz :
2 x ( Dual SIM )
Zugriff vom Mobiltelefon :
Kostenlose App BE WAVE für Android Kostenlose App BE WAVE für iOS
Ausgewählte Eigenschaften :
Konfiguration mithilfe der Anwendung BE WAVE, Fernsteuerung und Verwaltung, WiFi - lokaler Zugriff Verschlüsselte Funkverbindung in zwei Richtungen : AES-128 Unterscheidung der Übertragungskanäle – 4 Kanäle, die die automatische Auswahl ermöglichen, welcher die Übertragung ohne Interferenzen mit anderen Signalen im Frequenzband 868 MHz ermöglicht Independent radio channel for image reception SMS/CLIP/PUSH Benachrichtigung, Funktionsschemen, Überwachung von Ereignissen zu zwei Überwachungsstationen Bediente Formate: Contact ID IP, SIA IP Dual Path Reporting Communication via Ethernet network Eingebautes Mobiltelefon-Modul mit 2 SIM Slots (SMS, Überwachung für die Station, mobile App, PUSH Benachrichtigungen) - Datenübertragung in der Technologie 4G LTE / 2G GSM - je nach Möglichkeiten des mobilen Netzwerks Software-Aktualisierung über das Netz Die "ECO" Option ermöglicht sogar die vierfache Verlängerung der Arbeitszeit mit Batterie (nur ABAX2) Akku-Lademöglichkeit Kontrolle der Akkuspannung Monitoring the status of the battery Alarm für niedrigen Batteriestand Möglichkeit der Montage an der Wand Anti-Sabotage-Schutz (Detektion des Abrisses vom Untergrund sowie der Gehäuseöffnung) Versorgungskabel - im Set
Gehäuse :
Kunststoff
Farbe :
Weiß
Umweltklasse EN 50130-5 :
II
Energieversorgung :
230 V AC @ 50 Hz, 18650 Akku Li-Ion 3.6 V / 3200 mAh - Notspeisung
Stromverbrauch :
max. 2.8 W (Betrieb) 1.85 W (Standby-Modus)
Akku-Lebensdauer :
≤ 8 Jahre - ECO Modus
Arbeitstemperatur :
-10 °C ... 55 °C
Zulässige relative Luftfeuchtigkeit der Umgebung :
max. 93 % ± 3 %
Gewicht :
0.328 kg
Maße :
158 x 158 x 30 mm
Hersteller/Marke :
SATEL
Garantie :
2 Jahre
PRÄSENTATION
Ansicht von innen, nach Abnahme der Abdeckung:
microSD, SIM1, SIM2 Stecker:
Power, LAN connector and RESET button:
DATEIEN
Bedienungsanleitung
300 KB
Datenblatt BE WAVE / EN
6 MB
Datenblatt BE WAVE / EN
3 MB
Kurzanleitung zur Installation
0 MB
VERPACKUNG Maße(Länge x Breite x Höhe): 180x175x40 mm Verpackung: Karton Bruttogewicht: 0.488 kg
KOOPERIERENDE ELEMENTE ZU: SMART-HUB-PLUS
Netto: 0.00 CAD
Brutto: 0.00 CAD
Gewicht: 0.00 kg
Wir empfehlen besonders: ALARM-SET HECKERMANN-GUARDIAN-I Netto: 91.40 CAD
FUNK-REED-SCHALTER AX PRO DS-PDMC-EG2-WE Hikvision Netto: 72.18 CAD
PIR-DETEKTOR DS-PDP18-EG2(P) Hikvision Netto: 21.33 CAD
PIR-DETEKTOR ISC-BPR2-WP12 BOSCH Netto: 28.48 CAD
SEITLICHER REEDSCHALTER KN-CA52 Netto: 7.11 CAD
GRAFISCHES KEYPAD FÜR DIE ALARMZENTRALE TM-70 PARADOX Netto: 279.10 CAD
FUNKTASTATUR AX PRO DS-PK1-E-WE Hikvision Netto: 147.91 CAD
REED-SCHALTER FÜR TORE KN-OC55 Netto: 6.53 CAD
INFRAROT-BARRIERE AN900-B150 3 STRAHLEN Netto: 150.75 CAD