Language:Български Český Dansk Deutsch Eesti Ελληνικά English Español Français Italiano Latviešu Lietuvių Magyar Nederlands Polski Português Pусский Română Slovenski Slovenský Suomi Svenska
Currency:1 AUD - 2.5470 PLN 1 CAD - 2.8115 PLN 1 CHF - 4.2837 PLN 1 CZK - 0.1669 PLN 1 DKK - 0.5605 PLN 1 EUR - 4.1813 PLN 1 GBP - 4.8552 PLN 1 HUF - 0.0107 PLN 1 NOK - 0.3563 PLN 1 PLN - 1.0000 PLN 1 SEK - 0.3552 PLN 1 USD - 3.9318 PLN
Menu Recommended article
CCTV system admin default login and password
DEVELOPMENT KIT ESP32-ESP-WROOM-32 Espressif
DESCRIPTION The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.
The integrated 4 MB Flash memory will also help in using the additional capabilities of the controller.
Attention! During programming and using the module, pay attention to the voltage levels of the logic circuits. The module has been designed for use with a voltage of 3.3 VDC both on the supply side of the device and in the logical layer. Supplying 5 VDC voltage to the inputs may cause permanent damage to the module.
SPECIFICATION
Supported standards :
IEEE 802.11 b/g/n, Bluetooth LE
Processor :
Xtensa® 32-bit LX6
Supported transmission speeds :
max. 150 Mbps
Operation modes :
Station / Soft AP / Station + Soft AP
Antenna type :
Indoor
Interface :
micro USB , UART 3.3 V, SDIO, SPI, I2C, I2S, GPIO, ADC, DAC, PWM, TWAI®, RMT
Frequency range :
2.4 GHz
Receiver sensitivity :
11b 11M : -88 dBm 11g 54M : -75 dBm 11n HT20 MCS0 : -93 dBm 11n HT20 MCS7 : -70 dBm 11n HT40 MCS0 : -90 dBm 11n HT40 MCS7 : -70 dBm Bluetooth : -94 dBm
Security measures :
WEP / TKIP / AES , Hash (SHA-2), RSA, ECC
Main features :
Built-in USB -> UART interface (chip CP2102) Buttons for operating the device in programming mode
Operation temp :
-40 °C ... 85 °C
Weight :
0.01 kg
Dimensions :
55 x 29 x 13 mm
Manufacturer / Brand :
Espressif
Guarantee :
2 years
PRESENTATION FILES
Manufacturer's Data Sheet EN
528 kB
Processor Datasheet EN
828 kB
PACKAGE Dimensions (L x W x H): 60x30x15 mm Package: Blister Gross Weight: 0.010 kg
COMPONENTS OF WORKING WITH: ESP32-ESP-WROOM-32
Net: 0.00 NOK
Gross: 0.00 NOK
Weight: 0.00 kg
Especially recommended RFID TAG ATLO-614 Net: 9.26 NOK
AHD, HD-CVI, HD-TVI, PAL CAMERA HAC-HDW1200TRQ-0280B-S6 - 1080p 2.8 mm DAHUA Net: 477.13 NOK
OUTDOOR IR ILLUMINATOR 3N-80/60S2 Net: 606.23 NOK
TRIPLE SMART LIGHT TOUCH SWITCH ATLO-TB3-TUYA Wi-Fi, Tuya Smart Net: 123.49 NOK
CRIMPING TOOL HT-210N Net: 69.60 NOK
SWITCHING ADAPTER 12V/1.25A-TP MW POWER Net: 63.46 NOK
PATCHCORD RJ45/1.0-GREY 1.0 m Net: 6.06 NOK
SIDE MAGNETIC CONTACT KN-CA51 Net: 50.97 NOK
AHD, HD-CVI, HD-TVI, PAL CAMERA HAC-B1A21-0360B - 1080p 3.6 mm DAHUA Net: 493.97 NOK