 - Show All  - Show differences  - Back | 
DEVELOPMENT KIT ESP32-ESP-WROOM-32 Espressif |
REMOTE CONTROL FOR LED LIGHTING CONTROLLERS LED-CONTROL-W/RF 2.4 GHz, MONO, CCT MiBOXER / Mi-Light |
UPS VI-1500/R1U 1500 VA PowerWalker |
TIME RELAY MODULE AWZ-526 |
MULTIFUNCTION METER FOR ELECTRICAL INSTALLATIONS UT-595 UNI-T |
POWER DISTRIBUTION UNIT PD-8/RACK/IEC |
|  |  |  |  |  |  |
| 9.05 EUR
9.05 EUR
| 7.64 EUR
7.64 EUR
| 540.78 EUR
540.78 EUR
| 15.17 EUR
15.17 EUR
| 576.37 EUR
576.37 EUR
| 20.61 EUR
20.61 EUR
|
| Number of relay outputs: | ... | ... | ... | 1 | ... | ... |
| Nominal power: | ... | ... | 900 W | ... | ... | ... |
| Supported standards: | IEEE 802.11 b/g/n, Bluetooth LE | ... | ... | ... | ... | ... |
| Rated voltage: | ... | ... | ... | ... | ... | 230 V AC / 50 Hz |
| Apparent Power: | ... | ... | 1500 VA | ... | ... | ... |
| Processor: | Xtensa® 32-bit LX6 | ... | ... | ... | ... | ... |
| Total maximal current: | ... | ... | ... | ... | ... | 16 A |
| Application: | ... | Works with LED lighting : single-color (MONO) 12-24V LED strips, white LED strips with adjustable color temperature (CCT) 12-24V | ... | ... | ... | ... |
| Supported transmission speeds: | max. 150 Mbps | ... | ... | ... | ... | ... |
| Maximal total load: | ... | ... | ... | ... | ... | 3680 W |
| Current consumption: | ... | ... | ... | 35 mA (max) | ... | ... |
| Input voltage: | ... | ... | 165 ... 290 V AC | ... | ... | ... |
| Number of channels: | ... | 4 | ... | ... | ... | ... |
| Wireless: | ... | 2.4 GHz | ... | ... | ... | ... |
| Number of outlets: | ... | ... | ... | ... | ... | 8 for universal plug 230 V (DIN 49441) |
| Input frequency: | ... | ... | 45 ... 55 Hz | ... | ... | ... |
| Radio communication range (at open area): | ... | 30 m | ... | ... | ... | ... |
| Assembly: | ... | ... | ... | ... | ... | In RACK 19" cabinets |
| Output voltage: | ... | ... | 230 V AC (Pure Sine Wave) | ... | ... | ... |
| Operation modes: | Station / Soft AP / Station + Soft AP | ... | ... | ... | ... | ... |
| Relay maximal load: | ... | ... | ... | 1 A (max) @ 30 V DC / 50 V AC (max) | ... | ... |
| Output frequency: | ... | ... | 50 Hz | ... | ... | ... |
| Antenna type: | Indoor | ... | ... | ... | ... | ... |
| Length of the power cable: | ... | ... | ... | ... | ... | 2 m - cable with power connector IEC320 C14 |
| Output: | ... | ... | ... | 1 x NO/NC | ... | ... |
| Voltage adjustment: | ... | ... | ± 10 % | ... | ... | ... |
| Frequency adjustment: | ... | ... |  | ... | ... | ... |
| Housing: | ... | Plastic | ... | ... | ... | ... |
| Switch: | ... | ... | ... | ... | ... | |
| Transfer time: | ... | ... | max. 4 ms | ... | ... | ... |
| Charging time (recover to 90% capacity): | ... | ... | 8 hours | ... | ... | ... |
| Color: | ... | White | ... | ... | ... | ... |
| Battery: | ... | ... | 4 x 6V/9Ah | ... | ... | ... |
| Resistance measurement: | ... | ... | ... | ... | Test voltage 250 V : 0.05 MΩ ... 250 MΩ Test voltage 500 V : 0.05 MΩ ... 500 MΩ Test voltage 1000 V : 0.05 MΩ ... 1000 MΩ | ... |
| Measuring accuracy: | ... | ... | ... | ... | 0.05 MΩ ... 1000 MΩ ± (5% + 5) | ... |
| Estimated battery operation time: | ... | ... | 3.1 minutes @ 100% load 12.1 minutes @ 50% load | ... | ... | ... |
| Open circuit voltage: | ... | ... | ... | ... | Test voltage ± 10 % | ... |
| Number of outputs: | ... | ... | 4 pcs IEC320 C13 socket | ... | ... | ... |
| Interface: | micro USB, UART 3.3 V, SDIO, SPI, I2C, I2S, GPIO, ADC, DAC, PWM, TWAI®, RMT | ... | ... | ... | ... | ... |
| Management software: | ... | ... | PowerMaster | ... | ... | ... |
| Frequency range: | 2.4 GHz | ... | ... | ... | ... | ... |
| Test current: | ... | ... | ... | ... | 0.9 mA ... 1.1 mA | ... |
| Short-circuit current: | ... | ... | ... | ... | < 1.8 mA | ... |
| Protections: | ... | ... | Fuse Overvoltage Overload protection EPO (Emergency power off) switch | ... | ... | ... |
| AC voltage measurement: | ... | ... | ... | ... | 0 V ... 440 V ± (2% + 3) @ 1 V | ... |
| Operation state indication: | ... | ... | LCD display: operation mode, battery charging level, in/out voltage level Sound signaling - with Mute function | ... | ... | ... |
| DC voltage measurement: | ... | ... | ... | ... | 0 V ... ± 440 V ± (2% + 3) @ 1 V | ... |
| Measurement of small resistances: | ... | ... | ... | ... | 0.01 Ω ... 200 Ω ± (2% + 5) | ... |
| Receiver sensitivity: | 11b 11M : -88 dBm 11g 54M : -75 dBm 11n HT20 MCS0 : -93 dBm 11n HT20 MCS7 : -70 dBm 11n HT40 MCS0 : -90 dBm 11n HT40 MCS7 : -70 dBm Bluetooth : -94 dBm | ... | ... | ... | ... | ... |
| Application: | ... | ... | Surveillance Systems data storage centers network, servers, workstations Industrial Equipment | ... | ... | ... |
| Frequency measurement: | ... | ... | ... | ... | 20 Hz ... 100 Hz - for reference only | ... |
| Housing type: | ... | ... | RACK | ... | ... | 1 U RACK 19" |
| Security measures: | WEP / TKIP / AES, Hash (SHA-2), RSA, ECC | ... | ... | ... | ... | ... |
| Operation temp. / Relative humidity: | ... | ... | 0 °C ... 40 °C / 0 ... 90 % (non-condensing) | ... | ... | ... |
| Test of RCDs: | ... | ... | ... | ... | Working voltage: 220V ± 10 % Test current: 10mA / 30mA / 100mA / 300mA / 500mA Switch-off time ranges :
- 0 ... 2000 ms ± (5% + 5) @ 1/2 x nominal value of the residual current
- 0 ... 500 ms ± (5% + 5) @ 1 x nominal value of the residual current, Selective RCD
- 0 ... 500 ms ± (5% + 5) @ 2 x nominal value of the residual current, Selective RCD
- 0 ... 300 ms ± (5% + 5) @ 1 x nominal value of the residual current
- 0 ... 300 ms ± (5% + 5) @ 2 x nominal value of the residual current
- 0 ... 40 ms ± (5% + 5) @ 5 x nominal value of the residual current
| ... |
| RCD tripping current measurement: | ... | ... | ... | ... |
Increasing current test: 10 mA / 30 mA / 100 mA / 300 mA / 500 mA ± 10 % | ... |
| RCD automatic test: | ... | ... | ... | ... |  | ... |
| Phase sequence test: | ... | ... | ... | ... | 100 V ... 440 V / 45 Hz ... 65 Hz | ... |
| Continuity measurement of protective and equalizing conductors: | ... | ... | ... | ... | 0 Ω ... 199 Ω ± (2% + 5)
Measuring current > 20 mA @ 0 ... 2 Ω | ... |
| Line impedance measurement (L-N): | ... | ... | ... | ... | 0.05 Ω ... 1.99 Ω ± (5% + 5) 2 Ω ... 19.99 Ω ± (5% + 5) 20 Ω ... 2000 Ω ± (5% + 5)
Measuring current : 20 A / 20 ms
Measuring range of prospective short-circuit current : 0 ... 26 kA | ... |
| Short circuit loop impedance measurement (L-PE): | ... | ... | ... | ... | 0.05 Ω ... 1.99 Ω ± (5% + 5) 2 Ω ... 19.99 Ω ± (5% + 5) 20 Ω ... 2000 Ω ± (5% + 5)
Measuring current : 20 A / 20 ms
Measuring range of prospective short-circuit current : 0 ... 26 kA | ... |
| Automatic change of measuring ranges: | ... | ... | ... | ... | | ... |
| RS-232: | ... | ... | ... | ... | | ... |
| USB: | ... | ... | ... | ... | | ... |
| Main features: | Built-in USB -> UART interface (chip CP2102) Buttons for operating the device in programming mode | Large, readable buttons | Auto restart while AC is recovering "Cold Start" function Expansion slot Battery charge and maintenance control USB/RS-232 communication port | Time settings range
1. Range : 1 s ... 60 s ,
2. Range : 5 s ... 5 minutes LED indication | Warning of using high voltage during the measurement, Phase switch 0° / 180° during RCD test, Automatic identification of AC/DC voltage, Reset function for measuring low resistances, Large, readable LCD display with backlight, Buzzer, Automatic power-off, Low battery indicator, Aesthetic and solid construction | ... |
| Operation temp: | -40 °C ... 85 °C | -20 °C ... 60 °C | ... | -10 °C ... 40 °C | 0 °C ... 40 °C | ... |
| Permissible relative humidity: | ... | ... | ... | ... | ≤ 85 % (non-condensing) | ... |
| Power supply: | ... | 2 x 1.5V, type AAA/LR03 battery (not included) | ... | 10 ... 14 V DC | 8 x 1.5V, type AA/LR6/FR6 battery - included | ... |
| Weight: | 0.01 kg | 0.044 kg (without battery) | 16.31 kg | 0.035 kg | 1.1 kg | 0.700 kg |
| Dimensions: | 55 x 29 x 13 mm | 110 x 53 x 21 mm | 435 x 400 x 44 mm ; RACK 19", 1U | 69 x 43 x 22 mm | 210 x 175 x 90 mm | 482 x 46 x 44 mm |
| Manufacturer / Brand: | Espressif | MiBOXER / Mi-Light | PowerWalker | PULSAR | UNI-T | ... |
| Guarantee: | 2 years | 2 years | 2 years | 2 years | 2 years | 2 years |
English
Български
Český
Dansk
Deutsch
Eesti
Ελληνικά
Español
Français
Italiano
Latviešu 
Lietuvių 
Magyar
Nederlands
Polski
Português
Pусский
Română
Slovenski
Slovenský
Suomi
Svenska
EUR
AUD
CAD
CHF
CZK
DKK
GBP
HUF
NOK
PLN
SEK
USD
Home
Contact
Great Promotion !
Products Comparison
