 - Show All  - Show differences  - Back | 
EXTENDER HDMI+USB-EX-70-4KV2 |
AHD, HD-CVI, HD-TVI, CVBS, TCP/IP DVR APTI-XB0801-S31 8 CHANNELS |
RELAY MODULE 2R-D7 Modbus RTU |
ACCESS POINT RB-D52G-5HACD2HND-TC-HAP-AC2 hAP ac², 2.4 GHz, 5 GHz 300 Mbps + 867 Mbps MIKROTIK |
|  |  |  |  |
| 177.95 EUR
177.95 EUR
| 77.15 EUR
77.15 EUR
| 9.69 EUR
9.69 EUR
| 88.91 EUR
88.91 EUR
|
| PTZ control: | ... | ... | RS-485 / UART TTL | ... |
| Supported HDMI resolutions: | max. 4K UHD @ 60 Hz | ... | ... | ... |
| Frequency range: | ... | ... | ... | 2.4 GHz, 5 GHz |
| Protocol: | ... | ... | Modbus RTU | ... |
| Antenna type: | ... | ... | ... | 4 x Internal antenna |
| Transmission speed: | ... | ... | 4800 / 9600 / 19200 b/s (default: 9600 b/s) | ... |
| Standard: | ... | AHD, HD-CVI, HD-TVI, CVBS, TCP/IP | ... | ... |
| Number of inputs: | ... | ... | 2 pcs | ... |
| Number of relay outputs: | ... | ... | 2 pcs | ... |
| Standards: | ... | ... | ... | IEEE 802.11 b/g/n @ 2.4 GHz
IEEE 802.11 a/n/ac @ 5 GHz |
| Baud rates: | ... | ... | ... | 300 Mbps + 867 Mbps |
| Video inputs: | ... | 8 pcs BNC - AHD / HD-CVI / HD-TVI / CVBS | ... | ... |
| Relay maximal load: | ... | ... | 10 A / 250 V AC ,
10 A / 30 V DC | ... |
| LAN ports: | ... | ... | ... | 4 x 10 / 100 / 1000 Mbps LAN
1 x 10 / 100 / 1000 Mbps Uplink |
| Output: | ... | ... | 2 x NO/NC | ... |
| Video outputs: | ... | 1 pcs HDMI
1 pcs VGA
1 pcs CVBS output - BNC socket | ... | ... |
| Audio inputs: | ... | 2 pcs CINCH | ... | ... |
| Audio outputs: | ... | 1 pcs CINCH | ... | ... |
| LED indicators: | ... | ... | ... | Power, User, 4 x Ethernet, WAN, WPS |
| Maximal transmission range: | 60 m - UTP cat. 6, 6A, 7 @ 4K UHD (manufacturer data) 70 m - UTP cat. 5e @ 1080p (our tests result) 20 m - UTP cat. 5e @ 4K UHD (our tests result) 60 m - UTP cat. 6 @ 4K UHD (our tests result) | ... | ... | ... |
| Image compression method: | ... | H.265+ / H.265 / H.264+ / H.264 | ... | ... |
| Main features: | Extender also allows to extend an USB 2.0 port, eg. in order to control the recorder using the mouse Support KVM function, HDR10 support Transition of the HDMI signal in the transmitter EDID support ESD protection | ... | ... | ... |
| Permissible relative humidity: | 0 % ... 90 % (non-condensing) | ... | ... | ... |
| Receiver sensitivity: | ... | ... | ... | 2.4 GHz : 1M : -100 dBm 11M : -94 dBm 6M : -96 dBm 54M : -78 dBm MCS0 : -96 MCS7 : -73
5 GHz : 6M : -96 dBm 54M : -80 dBm MCS0 : -96 dBm MCS7 : -75 dBm MCS9 : -70 dBm |
| DDNS: | ... | ... | ... |  |
| DHCP server: | ... | ... | ... | |
| Image records resolutions: | ... | AHD / HD-CVI / HD-TVI : 1296 x 1944 - 5M-N, 1280 x 1440 - 4M-N, 1024 x 1536 - 3M-N, 960 x 1080 - 1080N, 1280 x 720 - 720p CVBS / PAL : 960 x 576 IP : max. 2592 x 1944 - 5 Mpx | ... | ... |
| Firmware update: | ... | ... | ... | |
| Management interface: | ... | ... | ... | Web browser |
| Transmitter power: | ... | ... | ... | max. 27 dBm @ 2.4 GHz
max. 26 dBm @ 5 GHz |
| Recording speed adjustment: | ... | 1 ... 6 fps @ 5M-N
1 ... 8 fps @ 4M-N
1 ... 10 fps @ 3M-N
1 ... 15 fps @ 1080N
1 ... 15 fps @ 720p
1 ... 25 fps @ 960H
for each channel | ... | ... |
| Main features: |
Very good image quality with no visible distortions caused by compression, No delays in video transmission, No delays in mouse control operations Designed to continuous operation 24/7 | ... | LED indication The control inputs protected with optocouplers, which allows the use of control signals with voltages in the range of 3.3 V DC ... 30 V DC The UART interface input is adapted to the installation of gold-pins for signals with voltages adapted to the TTL level (3.3 V DC / 5 V DC) Possibility to configure the device address (with saving the settings after a power failure) in the range of 1 - 255 (default address 255) Possibility to set the delay of the relay operation (base unit: 0.1 s, value range: 0.1 s ... 6553.5 s) Protection against reverse polarity of the input voltage | Built-in 4-port switch The WPS function allows to easy establish an encrypted connection WMM (Wi-Fi Multimedia) Port USB IPsec Mode button |
| Operation temp: | -20 °C ... 60 °C | ... | ... | -40 °C ... 50 °C |
| Operation modes: | ... | 8 x AHD / HD-TVI @ 5M-N - 12 fps 8x AHD / HD-CVI / HD-TVI @ 4M-N - 15 fps max. 6 x AHD / HD-CVI / HD-TVI @ 5M-N + max. 3 x IP @ 5 Mpx 16 x IP @ 5 Mpx (max) @ ≤ 48 Mbps
All modes allow for any combination of the AHD, HD-CVI, HD-TVI, CVBS cameras | ... | ... |
| Recording modes: | ... |
Manual, Sensor, Motion detection, Schedule | ... | ... |
| Supported hard drives: | ... |
1 x 8 TB SATA | ... | ... |
| External storage devices backup: | ... | Records backup at (.avi) format to USB (pendrive) | ... | ... |
| Searching and playback the records: | ... | Records searching: timeline or file list. Playback: forward, backward, fast, slow.
Records playback from max. 8 channels in the same time | ... | ... |
| Network functions: | ... |
Network Client Software (iVMS320): live view, playback and backup of the records IE browser: live view, playback and backup of the records and configuration of the recorder parameters | ... | ... |
| Mobile phones support: | ... | Port no.: 6000 or access by a cloud (P2P) Android: Free application BitVision, Android: Free application iVMS320 iOS (iPhone): Free application BitVision, iOS: Free application iVMS320 | ... | ... |
| Default IP address: | ... | 192.168.1.88 | ... | ... |
| Default admin user / password: | ... | admin / 12345 | ... | ... |
| Web browser access ports: | ... | 80, 5000, 554 | ... | ... |
| PC client access ports: | ... | 80, 5000, 554 | ... | ... |
| Mobile client access ports: | ... | 80, 5000, 6000 | ... | ... |
| Alarm inputs / outputs: | ... | 4 / 1 | ... | ... |
| PTZ control: | ... | RS-485 - PELCO-D/P | ... | ... |
| Motion Detection: | ... | Split the screen into zones : 22 x 18 motion zones | ... | ... |
| USB: | ... | 2 pcs USB 2.0 | ... | ... |
| Mouse support: | ... | | ... | ... |
| IR remote controller in the set: | ... |  | ... | ... |
| Power supply: | 5 V DC / 1 A - 2 pcs (included) | 12 V DC / 2 A (power adapter included) | 7 V ... 24 V DC (power adapter not included) | 12 ... 30 V DC / 0.8 A (power adapter included) 18 ... 28 V DC - Passive PoE |
| Color: | ... | Black | ... | ... |
| Weight: | 0.12 kg | 0.74 kg | 0.046 kg | 0.17 kg |
| Dimensions: | 85 x 75 x 20 mm - Transmitter or receiver dimensions | 260 x 226 x 46 mm | 85 x 49 x 19 mm | 120 x 99 x 33 mm |
| Supported languages: | ... | Polish, English, Bulgarian, Czech, French, Greek, Spanish, Dutch, German, Portuguese, Russian, Romanian, Turkish, Hungarian, Italian | ... | ... |
| Manufacturer / Brand: | ... | APTI | ... | MikroTik |
| Guarantee: | 2 years | 2 years | 2 years | 2 years |
English
Български
Český
Dansk
Deutsch
Eesti
Ελληνικά
Español
Français
Italiano
Latviešu 
Lietuvių 
Magyar
Nederlands
Polski
Português
Pусский
Română
Slovenski
Slovenský
Suomi
Svenska
EUR
AUD
CAD
CHF
CZK
DKK
GBP
HUF
NOK
PLN
SEK
USD
Home
Contact
New products
Products Comparison
