TopProducts Comparison
- Show All
- Show differences
- Back
SWITCH POE IP-5-11-L2 5-PORT ATTE


RELAY MODULE 2R-D7 Modbus RTU

128.50 EUR
128.50 EUR
9.71 EUR
9.71 EUR
PTZ control:  ...  RS-485 / UART TTL  
Protocol:  ...  Modbus RTU  
Number of inputs:  ...  2 pcs  
Number of relay outputs:  ...  2 pcs  
LAN ports:  
  • 1 x RJ45 10/100 Base-T - Uplink,
  • 5 x RJ45 10/100 Base-T + PoE (802.3af/at) / Passive PoE  
    		• ...  
    Management:    ...  
    Relay maximal load:  ...  10 A / 250 V AC ,
    10 A / 30 V DC  
    Output:  ...  2 x NO/NC  
    LED diodes:  Power, LAN  ...  
    Transmission speed:  10 / 100 Mbps : 1 Port LAN + 5 LAN & PoE ports  4800 / 9600 / 19200 b/s (default: 9600 b/s)  
    Maximal output power:  
  • 40 W @ Passive PoE - LAN1 ... LAN4 ports,
  • 60 W @ Passive PoE - Port LAN5,
  • 30 W @ PoE (802.3af/at) - LAN1 ... LAN5 ports  
    		• ...  
    Maximal total power:  60 W  ...  
    Operation modes:  
  • Standard : 100 m @ 10/100 Mb/s - LAN1 ... LAN6 ports
  • Long Range : 280 m @ 10 Mb/s - LAN1 ... LAN4 ports ; 100 m @ 10/100 Mb/s - LAN5, LAN6 ports  
    		• ...  
    Main features:  
  • Possible cascading device connection (power transmission between devices using Passive PoE via LAN 5 port)
  • The output PoE voltage is equal to the input voltage
  • The ability to independently turn on and off the PoE power for each of the LAN 1 ... LAN 5 ports
  • The modular design streamlines service tasks and enables quick and easy system expansion
  • The raster system of module assembly facilitates the expansion of the device by further modules
  • The ABOX-L2 mounting enclosure is equipped with 11 cable entries with glands in the 10 x M16 + 1 x M20 arrangement
  • "Index of Protection" : IP56  
  • LED indication
  • The control inputs protected with optocouplers, which allows the use of control signals with voltages in the range of 3.3 V DC ... 30 V DC
  • The UART interface input is adapted to the installation of gold-pins for signals with voltages adapted to the TTL level (3.3 V DC / 5 V DC)
  • Possibility to configure the device address (with saving the settings after a power failure) in the range of 1 - 255 (default address 255)
  • Possibility to set the delay of the relay operation (base unit: 0.1 s, value range: 0.1 s ... 6553.5 s)
  • Protection against reverse polarity of the input voltage  
    • Power supply:  190  ... 260 V AC - cable terminals  7 V ... 24 V DC (power adapter not included)  
    Weight:  1.02 kg  0.046 kg  
    Dimensions:  248  x 198  x 96 mm  85  x 49  x 19 mm  
    Manufacturer / Brand:  ATTE  ...  
    Guarantee:  3 years  2 years