- Show All - Show differences - Back | INSULATION RESISTANCE METER + RCD TESTER UT-526 UNI-T | CABLE TRACKER MS-6818 | USB SOCKET TESTER UT-658-DUAL UNI-T |
| | | |
| 213.20 EUR 213.20 EUR
| 258.85 EUR 258.85 EUR
| 17.04 EUR 17.04 EUR
|
Device type: | ... | ... | Power meter via USB port |
Output signal: | ... | 125 kHz - Transmitter | ... |
Input socket type: | ... | ... | 1 x USB-A plug 1 x USB-C plug |
Output socket type: | ... | ... | 1 x USB-A socket 1 x USB-C socket |
LCD display: | ... | ... | 1.85 " |
Resistance measurement: | Test voltage 250 V : 0.05 MΩ ... 200 MΩ Test voltage 500 V : 0.05 MΩ ... 300 MΩ Test voltage 1000 V : 0.05 MΩ ... 500 MΩ | ... | ... |
DC current measurement: | ... | ... | 0.05 ... 3 A @ 0.01 A - USB-A 0.05 ... 5 A @ 0.01 A - USB-C |
Measuring accuracy: | 0.05 MΩ ... 500 MΩ ± (5% + 5) | ... | ... |
Battery capacity measurement: | ... | ... | 0 ... 99999 mAh |
Main features: | ... | Wire continuity test, Searching the place of wire damage, 3 operating modes: unipolar, bipolar, loop, The ability to identify any metal elements of electrical, plumbing, heating installations, etc., Detection of the cable in the wall and underground at depth up to 2m, The possibility of operating under mains voltage and in a circuit without voltage, 8 transmission codes set on the transmitter and distinguished by the receiver, Built-in buzzer allows to operate the device without looking at the screen | ... |
Open circuit voltage: | Test voltage + 10 % | ... | ... |
Energy measurement: | ... | ... | 0 ... 1000 Wh |
Test current: | 0.9 mA ... 1.1 mA | ... | ... |
Short-circuit current: | < 1.8 mA | ... | ... |
Equivalent resistance of the circuit measurement: | ... | ... | 1 ... 480 Ω |
Data storage: | ... | ... | 10 measurements |
Housing: | ... | ... | Plastic |
AC voltage measurement: | 0 V ... 440 V ± (2% + 3) @ 1 V | 12 ... 400 V | ... |
DC voltage measurement: | 0 V ... 440 V ± (2% + 3) @ 1 V | 12 ... 400 V | 4 ... 24 V ± 1 % |
Measurement of small resistances: | 0.01 Ω ... 2000 Ω ± (2% + 5) | ... | ... |
Frequency measurement: | 20 Hz ... 100 Hz - for reference only | ... | ... |
Test of RCDs: | Working voltage: 220V ± 10 % Test current: 10mA / 30mA / 100mA / 300mA Switch-off time ranges :
- 0 ... 2000 ms ± (5% + 2) @ 10 mA
- 0 ... 500 ms ± (5% + 2) @ 30 mA
- 0 ... 300 ms ± (5% + 2) @ 100 mA
- 0 ... 300 ms ± (5% + 2) @ 300 mA
| ... | ... |
Automatic change of measuring ranges: | | ... | ... |
RS-232: | | ... | ... |
USB: | | ... | ... |
Main features: | Warning of using high voltage during the measurement, Phase switch 0° / 180° during RCD test, Automatic identification of AC/DC voltage, Large, readable LCD display with backlight, Buzzer, Low battery level alarm, Aesthetic and solid construction | ... | ... |
Operation temp: | 0 °C ... 40 °C | ... | ... |
Permissible relative humidity: | ≤ 85 % (non-condensing) | ... | ... |
Power supply: | 6 x 1.5V, type AA/LR6/FR6 battery - included | Transmitter : 9V, type 6LR61 battery - included Receiver : 6 x 1.5V, type AAA/LR03 battery - In the kit | ... |
Weight: | 0.45 kg | 0.37 kg - Transmitter 0.27 kg - Receiver | 0.065 kg |
Dimensions: | 150 x 100 x 71 mm | 190 x 90 x 41 mm - Transmitter 241 x 79 x 38 mm - Receiver | 123 x 53 x 14 mm |
Manufacturer / Brand: | UNI-T | ... | UNI-T |
Guarantee: | 2 years | 2 years | 2 years |