TopProducts Comparison
- Show All
- Show differences
- Back
MAINS SOCKET TESTER WITH RCD CHECKING FUNCTION UT-07B-EU UNI-T


ACCESS CONTROLLER MODULE MC16-PAC-ST-15 ROGER


CABLES TESTER CS-NT24-PRO

8.65 EUR
8.65 EUR
1453.89 EUR
1453.89 EUR
201.58 EUR
201.58 EUR
Rated voltage:  230 V AC  ...  ...  
Number of served transitions:  ...  15  (two-way)  ...  
Number of supported readers:  ...  60   ...  
Tested cables:  ...  ...  STP / UTP cat. 5, 5e, 6, 6e - RJ45 (8P8C), RJ11 (6P4C), Coaxial cable  
Number of users:  ...  unlimited (purchase of the appropriate license required)  ...  
Number of media per ID:  ...  8  - Proximity card, PIN code, fingerprint, etc.  ...  
Buffer memory:  ...  8 000 000 events buffer  ...  
Number of access zones:  ...  30   ...  
Number of alarm zones:  ...  30   ...  
Battery backup support:  ...  12 V / 7 Ah  ...  
"Index of Protection":  IP40  ...  ...  
Typical battery charge time:  ...  ...  3 h  
Backup time:  ...  ...  16 h  
Communication:  ...  
  • Ethernet - RJ-45 socket
  • RACS 5 v2 (Roger)
  • RS-485 interface  
    		• ...  
    Power supply:  ...  
  • 17  ... 22 V AC
  • 10  ... 15 V DC
  • 22  ... 26 V DC  
    		• Cables tester : Li-Ion battery 3.7 V / 2000 mAh, USB DC 5V/2A power adapter (included)
    Probe : 2 x 1.5V, type AA/LR6/FR6 battery (not included)  
    Operation temp:  0 °C ... 40 °C  5 °C ... 40 °C  ...  
    Permissible relative humidity:  ...  10 % ... 95 % (non-condensing)  ...  
    Manufacturer / Brand:  UNI-T  ROGER  ...  
    Main features:  
  • RCD test (residual current device test) : ~ 30 mA
  • Phase conductor position test
  • Signaling a lack of grounding
  • Signaling phase failure
  • Signaling a lack of a neutral wire
  • Signaling of phase and ground swap
  • Signaling of phase and ground swap and a lack of grounding  
  • Integrated support in VISO ST software
  • Functions in the VISO ST system:
    - MSSQL database
    - work in distributed systems
    - multi-station work
    - monitoring of transitions with video preview
    - T&A event reporting
    - maximum number of transitions in the system : 128   
  • 2.4 " LCD display - 320 x 240 px
  • Cable test and cable tracer : cable type, UTP cable's sequence and type test, the fault of RJ45 connector
  • Test TDR - RJ45 : pair status, length, attenuation, reflectivity, impedance, skew - Length of the cable max. 180 m
  • Test TDR 2.0 : Searching for a wire fault point - Length of the cable max. 1200 m,
  • Detection of the connected port in switch
  • Test PING : correct operation of the IP camera's Ethernet port, correct IP address
  • IP Scan
  • Identification of the network port and duplex mode
  • Identification the wire in the group of wires
  • Telephone line condition detection
  • Detecting and locating a cable break or short circuit
  • HD coaxial video level meter
  • Automatic power-off : 10  ... 120 minutes  
    • Weight:  0.08 kg  0.14 kg  0.34 kg - Cables tester
    0.11 kg - Probe  
    Dimensions:  65  x 65  x 72 mm  175  x 72  x 30 mm  175  x 88  x 40 mm - Cables tester
    220  x 47  x 32 mm - Probe  
    Guarantee:  2 years  3 years  2 years