Tamper protection (detection of removing from mounting surface and enclosure opening)
LED indication
Beep signal
Can be used for 13.56 MHz S50 card programming (free of charge RARC software is required)
120 indexed users
History of 1024 events
Two transistor outputs
Two inputs NO/NC
Manual or computer programming
LED indication
The control inputs protected with optocouplers, which allows the use of control signals with voltages in the range of 3.3 V DC ... 30 V DC
The UART interface input is adapted to the installation of gold-pins for signals with voltages adapted to the TTL level (3.3 V DC / 5 V DC)
Possibility to configure the device address (with saving the settings after a power failure) in the range of 1 - 255 (default address 255)
Possibility to set the delay of the relay operation (base unit: 0.1 s, value range: 0.1 s ... 6553.5 s)
Protection against reverse polarity of the input voltage
...
...
Average current consumption:
65 mA
...
...
...
Power supply:
12 V DC
7 V ... 24 V DC (power adapter not included)
...
5 V DC - from USB port
Operation temp:
-25 °C ... 60 °C
...
...
...
Permissible relative humidity:
10 ... 95 % (non-condensing)
...
...
...
"Index of Protection":
IP67
...
...
...
Weight:
0.11 kg
0.046 kg
0.54 kg
0.05 kg
Dimensions:
100 x 40 x 25 mm
85 x 49 x 19 mm
183 x 126 x 127 mm
118 x 40 x 9 mm
Manufacturer / Brand:
ROGER
...
UNIVIEW
MACLEAN
Guarantee:
3 years
2 years
3 years
2 years
Net:
0.00
EUR
Gross:
0.00
EUR
Weight:
0.00
kg
This site uses cookies. More information about using by us cookie files, their usage and how to modify the acceptance of cookie files, can be found by pressing
link