The G-16/R19 device allows to comfortable connect 2x8 YAP type CCTV cables and orderly power supply distribution from one higher power unit. The G-16/R19 distributor splits the power into 2x8 outputs, each of them is protected by fuse and has indication of output voltage (the corresponding LED glows when the voltage is present at the output). The G-16/R19 has three power inputs, which are connected to each other. It does not matter to which connector we connect the power voltage, so it is possible to use cable with DC 2.1/5.5 power plug or isolated wires. The devices can be also connected in series, for example: from the cable terminals of the first device DC IN to the second G-16/R19 device input DC IN via WT-2.1 cable. The device is ideal for connection with 2.1/5.5mm power adapter plugs and YAP75 cables, which are used in installations of cameras.
No more hanging down wires in the RACK cabinet. Take care about your wires arrangement.
A standard CCTV YAP75-0.59/3.7+2x0.5 cable has 2 wires 0.5mm² each. Theoretical resistance is 3.4Ω/100m. Manufacturer data is 5.5Ω/100m. Powering the camera with DC 12V over CCTV YAP75 cable and assuming the voltage drop to 11V, the power may be delivered over the distances shown on the below table.
Front panel view:
Front panel BNC connectors: