Language:Български Český Dansk Deutsch Eesti Ελληνικά English Español Français Italiano Latviešu Lietuvių Magyar Nederlands Polski Português Pусский Română Slovenski Slovenský Suomi Svenska
Currency:1 AUD - 2.5894 PLN 1 CAD - 2.8367 PLN 1 CHF - 4.4154 PLN 1 CZK - 0.1701 PLN 1 DKK - 0.5641 PLN 1 EUR - 4.2077 PLN 1 GBP - 4.9777 PLN 1 HUF - 0.0106 PLN 1 NOK - 0.3679 PLN 1 PLN - 1.0000 PLN 1 SEK - 0.3726 PLN 1 USD - 3.9657 PLN
Menu Recommended article
PoE 802.3at - data and power transmission standard
REPEATER VHD-15 AHD, HD-CVI, HD-TVI SIGNAL AMPLIFIER DELTA
DESCRIPTION The VHD-15 repeater is designed to amplification of the video signal transmitted via twisted-pair cable or coaxial cable, what enables high resolution video transmission of (AHD, HD-CVI, HD-TVI) signals for long distance.
A single repeater allows to correct attenuation of approx. 150 m UTP cable and approx. 300 m - 500 m coaxial cable (depending on the type of cable used). The using of single repeater ensures good quality of image for twisted-pair cable at a distance up to 300 m. At a distance up to 450 m two repeaters are required, and at a distance up to 600 m you should use three repeaters. For coaxial cable, depending on type, these distances will be correspondingly longer.
SPECIFICATION
Standard :
AHD - 5 Mpx , 12 fps , HD-CVI - 1080p , 25 fps , HD-TVI - 5 Mpx , 12 fps , CVBS - PAL / NTSC
Device type :
Active
The ability of signal regeneration :
150 m - Twisted-pair cable , 300 m - RG59 , 500 m - Triset113
Power supply :
8 V ... 24 V DC (power adapter not included) The possibility of remote powering through the unused pairs of twisted-pair cable
Current consumption :
< 50 mA
Coaxial socket impedance :
75 Ω
Symmetrical socket impedance :
100 Ω
Number of inputs :
1
Number of outputs :
1
Coaxial socket type :
BNC socket
Symmetrical socket type :
terminals
Weight :
0.080 kg
Dimensions :
103 x 62 x 29 mm
Manufacturer / Brand :
DELTA
Guarantee :
3 years
PRESENTATION
Front panel description:
1. Symmetrical output (UTP) 2. Video signal indicator 3. Asymmetrical output (COAX) 4. Symmetrical input (UTP) 5. Asymmetrical input (COAX) 6. Power supply 7. Power indicator 8. Output transformer switch 9. Input transformer switch
Configuration with application of a single repeater:
Example configuration with application of a single repeater and coaxial cable:
1. Camera 2. Coaxial cable
The most preferred configuration for reasons of noise. Repeater at a distance of approx. 50% - 70% of the cable length:
1. Camera 2. Coaxial cable 3. Video Balun 4. Twisted-pair cable
The risk of overdriving of the repeater by a strong signal from the close placed camera. The discoloration may be visible:
1. Camera 2. Coaxial cable 3. Twisted-pair cable 4. Video Balun
Due to the amplification of heavily suppressed signal obtained worst signal-to-noise ratio:
1. Camera 2. Coaxial cable 3. Twisted-pair cable 4. Video Balun
Configurations with application of two repeaters. The performed tests show that the maximum distance segments connecting device for twisted pair cable should not exceed 300 m due to deteriorating the signal-to-noise ratio. For a coaxial cable, this distance is approx. 600 m ... 1000 m depending on cable type:
Example configuration with application of two repeaters and coaxial cable:
1. Camera 2. Coaxial cable
For best results, place the devices at similar distances from each other:
1. Camera 2. Coaxial cable 3. Twisted-pair cable 4. Video Balun
Signal amplification in the end results in a worse signal-to-noise ratio, because the amplified signal is strongly suppressed:
1. Camera 2. Coaxial cable 3. Twisted-pair cable 4. Video Balun
Increasing the distance between the devices causes a worse signal-to-noise ratio and increases the risk of distortion of the repeater:
1. Camera 2. Coaxial cable 3. Twisted-pair cable 4. Video Balun
The least recommended configuration (although the easiest to do); large distance between the devices results in a low signal-to-noise ratio and a repeater placed close to the camera increases the risk of overdriving:
1. Camera 2. Coaxial cable 3. Twisted-pair cable
Image quality comparison for cat. 5e UTP cable at a distance of 500m depending on the number of repeaters used:
1) Image without the repeater 2) 1 x VHD-15 3) 2 x VHD-15 4) 3 x VHD-15
Image quality comparison for RG-59 cable at a distance of 800 m depending on the number of repeaters used:
1) Image without the repeater 2) 1 x VHD-15 3) 2 x VHD-15 4) 3 x VHD-15
Image quality comparison for Triset-113 cable at a distance of 1100 m depending on the number of repeaters used:
1) Image without the repeater 2) 1 x VHD-15 3) 2 x VHD-15
Connection method of the VHD-15 with video transformers:
FILES PACKAGE Dimensions (L x W x H): 120x65x35 mm Package: Carton Gross Weight: 0.092 kg
COMPONENTS OF WORKING WITH: VHD-15
Net: 0.00 NOK
Gross: 0.00 NOK
Weight: 0.00 kg
Especially recommended AHD, HD-CVI, HD-TVI, PAL CAMERA APTI-H54B - 8.3 Mpx, 4K UHD Net: 1152.49 NOK
PATCHCORD RJ45/15-GREY 15 m Net: 30.82 NOK
HDD FOR DVR HDD-ST1000VX005 1TB 24/7 SkyHawk SEAGATE Net: 603.42 NOK
WALL MOUNT UMA-50U50 Net: 334.87 NOK
STEEL STRIP TS-OK-43 Net: 52.62 NOK
SC PATCH PANEL PP-24SX-SC Net: 41.97 NOK
COUPLER BNC-G/BNC-G*P100 Net: 173.96 NOK
AHD, HD-CVI, HD-TVI, PAL CAMERA HAC-HFW2501TU-A-0360B-S2 - 5 Mpx 3.6 mm DAHUA Net: 1739.60 NOK
CABLE CROSS-BNC/0.8M*P20 0.8 m Net: 241.91 NOK