The OPV-16/RACK overvoltage limiter effectively protects signal line carrying away the stroke current to the ground, due to above provides adequate overvoltage protection for electronic devices. Our statistics collected from many years of service show that about 25 percent of damages of electronic equipment was caused by overvoltages.
The OPV-16/RACK does not affect signal quality and is a passive device, no supplying is required.
ATTENTION! Before installation please read the following instructions: Any installation work cannot be led during thunderstorm. The OPV-16/RACK requires good quality grounding installation. The limiter should be placed as near as possible to the protected device. The OPV-16/RACK is not symmetrical and the protected devices must be connected to the "PROTECTED DEVICE" BNC output sockets. The "LINE" input BNC sockets must be connected to the transmitting lines, which may surge.
1) Overvoltage2) Coaxial cable3) overvoltage limiter4) gas spark arrester5) delayed system6) protection diodes7) Grounding8) Protected devices
1) Cameras2) Coaxial cable3) Monitors4) Grounding
In order to fully protect all equipment connected to video lines against overvoltages, this application is recommended:
Amplitude - frequency response (RF PWR OUT = 0 dBm):