DESCRIPTION The OFT-8111/RX device is 8-channels receiver for OFT-111/TX transmitters. It includes eight OFT-111/RX transmitters inside one RACK type case. The OFT-8111/RX fiber receiver allows to receive up to 8 analog video signals, 8 audio signals, 1 telemetry data channel (RS-485) and has built-in 8-channel alarm module. Optical signal is transmitted and received in the II i III transmission window of 1310/1550 nm.
The RS-485 data transmission is bidirectional at half duplex mode. The transmission direction is set automatically and depends on that, where the RS-485 signal will be connected to (receiver or transmitter). The connection between modules is made using from 1 to 8 single fibers.
Each fiber is used to transmission of the 1 video, audio channel, RS-485 channel and a signal from alarm module. Above the fiber, video, alarm and power connectors there are LED indicators. The constant light means the signals presence. RS-485 signal is indicating by LED blinking.
Each terminal of the receiver „ALARM OUTPUTS” connector is connected to the control transistor drain and the source to the ground. The short-circuit of the transmitter alarm input pins causes the short-circuit the alarm output to the ground. On the (+) terminal there is a 11,4V voltage.
So, this output can be used to control the relay on. The current consumption of each output can be maximal 0.5A, but the summary value of the current consumption has to be less than 2A. You have to select also the right power supply adapter, because the device current consumption is about 1A.
The ground of the device is connected to the (-) terminal. Device supports any CCTV cameras . The device is designed to continuous work in closed spaces.