Indoor micro camera equipped with very good quality Sony CMOS sensor. High sensor resolution produces high detailed image. So, you can use this camera for example to persons recognition with good results.
Additionally camera has a possibility to select output signal standard between AHD and PAL. The change of the AHD / PAL standard is done with joystick by holding it tilted to the right or to the left for approx. 5 seconds, without going into the OSD.
Camera is very small:
The appropriate signal format selection is done by tilting and holding the joystick for 5 s without entering to the OSD menu. Changing the signal to the NTSC in the camera causes loss of image in connected AHD recorder:
Configuration1) Turn on the power2) Move the joystick left or right, setting the appropriate resolution3) Move the joystick down by 5 s, setting the PAL / NTSC The PAL and NTSC standard is set regardless of the resolution.
Camera image at artificial illumination (about 30Lux):
Camera image at direct strong light opposite to camera:
Camera image at night conditions with external IR illuminator on:
Camera image at night conditions, at different illumination values show below:
OSD menu screenshots EN