The POE-8/R panel is a passive device used to supply power via UTP cables to terminal devices equipped with PoE ports. To data transmission in twisted-pair cable are normally use wires 1, 2, 3 and 6. The PoE panel injects supply voltage to the 4, 5(+); 7, 8(-) pins/wires.
On the panel front there two rows of RJ-45 ports. Panel can supply power to 8 PoE devices.
The POE-8/R is a passive device.
The device features overload protection (polyswitch on each output: the power is switched off by the long flow of high current) and short-circuit protection. The front panel green light LED indicates normal operation of the device.
Mounting with self-adhesive bases:
Wiring sequence inside the RJ-45 plug. Plug wiring sequence is consistent with the T568B standard:
1) white/orange2) orange3) white/green4) Blue5) white/blue6) green7) white/brown8) brown
The device can be conveniently mounted on the (*DIN TS-35*) rail:
For this purpose mount the WM-35 (available separately):
Then install the LPCB-1 (included):
The whole must be made as shown below:
1) M3 x 10 screw2) M4 x 12 screw
In the kit: