Accessories

2-position key switch, bistable; Relay maximal load: 4 A @ 125 V AC, 2 A @ 250 V AC ; Material: Aluminum ; Color: Silver ;

Dedicated handle for APTI-AI70FRTD access controller;

Dedicated handle for ASI7213X-T1 access controller;

Dedicated handle for ASI7213Y-V3-T1 access controller;

Key to the APWK and APPK emergency buttons to reset the buttons;

Application: FP3/GR/DP ;

The MLT-POD spacer is designed to increase the distance between the reader surface and the ground on which it is mounted; When the RFID card reader is mounted on a metal surface, the use of a spacer increases the reading range;

Metal clip for badge with transparent foil band and snap fastener; Color: Silver ;

Color: Silver ;

The MCX2-BRD is an I/O expander designed to work in the RACS 5 access control system; Inputs: 2 x NO/NC/EOL/2EOL/3EOL ; Relay output: 2 x 1.5 A / 30 V ;

Two-piece, blue lanyard with a detachable clip;

Color: Blue, printed manufacturer's logo ;

Supported resolutions: max. 12 Mpx - 4000 x 3000 px ; Supported hard drives: 15 x 10 TB SATA III, Cooperation with the DAHUA disk arrays of the ESS series Maximum supported total disk space : 200 TB ; Network interface: 4 x 10/100/1000 Base-T ;

Plastic holder for standard proximity card; The holes for the hook on the both sides; Material: Plastic ; Color: Colorless ;

Plastic holder for standard proximity card; The hole for the hook on the long side; Material: Plastic ; Color: Colorless ;

Plastic holder for standard proximity card; Enhanced durability; The hole for the hook on the long side; Material: Plastic ; Color: Colorless ;

Plastic holder for standard proximity card; The hole for the hook on the short side; Material: Plastic ; Color: Colorless ;

Plastic holder for standard proximity card; The hole for the hook on the long side; Material: Plastic ; Color: Colorless ;

Plastic holder for standard proximity card; The hole for the hook on the long side; Material: Plastic ; Color: Colorless ;

Proximity card reader plugs into the computer's USB port for quick and convenient loading cards, keyfobs, etc. in DLOADX, ACCO Soft, ACCO-SOFT-LT applications; Cards support: Unique EM 125kHz ; Communication: USB ; Power supply: from USB port ;

Cards support: Unique EM 125kHz ; Communication: USB ; Power supply: from USB port ;

Cards support: 13.56 MHz S50, 13.56 MHz S50 DESFire ( EV1, EV2 ) ; Communication: USB - HID ; Power supply: from USB port ;

Pendant for the badge with a band made of transparent foil and a latch; The retractable line makes it easy to bring the card closer to the reader without having to unfasten it from your clothes; Color: Black ;

The retractable line makes it easy to bring the card closer to the reader without having to unfasten it from your clothes; Color: Blue + Silver ;

Main features: Support up to 3000 finger prints ; Power supply: 5 V DC - Supplied from other modules ; "Index of Protection": IP65 ; Vandal-proof: IK07 ;

The interface boosts and improves stability of data transmission in the Wiegand standard;

The product is dedicated to cooperate with the DAHUA access controllers of the series ASC21xxB, ASC12xxB; Output voltage: 11 V ... 13.8 V DC ; Adapter operation control: PSU output indicating DC voltage loss or power supply unit failure ;

The RW-125K allows to program (copy) RFID cards, keyfobs and tags; Standard: Unique EM 125kHz ; Compatibility: EM41xx ; Reading distance of prox-keys: max. 10 cm ; Battery power supply: 2 x  alkaline battery AAA ;

Converter between serial transmission interfaces of standards USB and RS-485; Unit is powered straight from the USB port of the PC - doesn't require any external power source; UTP transmission range: max. 1200 m ; Main features: Plug & Play ;

Converter between serial transmission interfaces of standards USB and RS-485; Unit is powered straight from the USB port of the PC - doesn't require any external power source;

Converter between serial transmission interfaces of standards USB and RS-485; Unit is powered straight from the USB port of the PC - doesn't require any external power source;

The UT-4DR interface enables communication with devices equipped with communication serial port via computer network;

The demonstration kit of the RACS 5 access control system by ROGER; The kit includes: access controller, RFID readers and necessary communication interfaces;

The ME-10 housing is intended for the installation of the MCT12 / MCT84 proximity readers in order to protect them against weather conditions and to strengthen protection against mechanical damages; Housing type: Surface-mounted ;

The MCX4D is an I/O expander designed to work in the RACS 5 access control system; The module is dedicated to support 4 doors, distributes power supply and communication bus to controlled doors, and supports a backup battery;

The MCX8-BRD is an I/O expander designed to work in the RACS 5 access control system; Inputs: 8 x NO/NC/EOL/2EOL/3EOL ; Relay output: 8 x 1.5 A / 30 V ;

The DS-K2M061 secure door control unit is an intermediary device in the transfer of information between the proximity reader, the exit button, the access controller and the electromagnetic lock; The device allows to maintain the last state of the lock in the case of communication loss with the controller or failure of any of the system components;

Contact type: NO, monostable ; Material: Plastic ; Line length: 79 cm ; Color: White / Red ;

Dedicated handle for ASI7213X-T1 access controller;

The rainproof housing for ATLO code lock, protecting against adverse weather conditions;