The company is closed on: 2024-05-01
Międzynarodowe Święto Pracy
2024-05-03
Święto Konstytucji 3 Maja
Language:Български Český Dansk Deutsch Eesti Ελληνικά English Español Français Italiano Latviešu Lietuvių Magyar Nederlands Polski Português Pусский Română Slovenski Slovenský Suomi Svenska
Currency:1 AUD - 2.5367 PLN 1 CAD - 2.8421 PLN 1 CHF - 4.2788 PLN 1 CZK - 0.1655 PLN 1 DKK - 0.5604 PLN 1 EUR - 4.1795 PLN 1 GBP - 4.8613 PLN 1 HUF - 0.0106 PLN 1 NOK - 0.3583 PLN 1 PLN - 1.0000 PLN 1 SEK - 0.3590 PLN 1 USD - 3.9528 PLN
Menu Recommended article
CCTV system admin default login and password
SET OF UTP / 2-WIRE CONVERTERS FOR LAN+POE TRANSMISSION ETH10-2WIRE-SET 2 PCS SET ATTE
DESCRIPTION The ETH10-2WIRE-SET set includes transmitter and receiver modules, it is used for Ethernet data and PoE power supply transmission using 2 wires, e.g. one pair of UTP twisted pair cable.
The devices allow the installation of cameras or other IP PoE devices in places where replacement of the existing cabling is impossible or unprofitable. The ETH10-2wire-TX module is powered from any PoE switch (RJ45 port) and then via 2 wires, it enables two-way network communication and powering the ETH10-2wire-RX module. The camera or another PoE receiver can be connected to the RJ45 port of the ETH10-2wire-RX module at the end of the line. The devices can be optionally powered from the POWER screw terminals.
Depending on the selected converter operation mode, powering them and devices connected to them can be realized in several ways. PoE power supply or from an external power supply, both from the ETH10-2wire-TX transmitter and the ETH10-2wire-RX receiver (configuration with jumpers).
SPECIFICATION
Connectors :
1 pcs RJ45 1 pcs terminals (screw terminals) - 0.32 ... 3.3 mm² ( 22 ... 12 AWG )
LAN ports :
1 pcs RJ45 10 Mbps
Connectors description :
ETH10-2WIRE-TX : PoE IN - Passive PoE ≤ 30 W, PoE (802.3at) ≤ 30 W, PoE (802.3af) ≤ 15 W ("+/-": 1, 2 pins; "+/-": 3, 6 pins) or ("+/-": 4, 5 pins; "+/-": 7, 8 pins) Power DATA - 2-wire ETH10-2WIRE-RX : PoE OUT - Passive PoE ("+": 4, 5 pins; "-": 7, 8 pins) Power DATA - 2-wire
Transmission speed :
10 Mbps
Transmission range :
1000 m @ 2-wire 100 m @ UTP : Switch PoE - ETH10-2WIRE-TX 100 m @ UTP : ETH10-2WIRE-RX - IP Camera
LED indicators :
Power LAN 2-wire
Protections :
Overvoltage - LAN, DATA Protection against reverse polarity connection - Power Overload 0.6 A - PoE IN ETH10-2WIRE-TX
Main features :
Plug & Play Support for IP cameras and network devices Full transparency for networks Operation modes - Set with jumpers
Power supply :
ETH10-2WIRE-TX : 30 ... 56 V DC - PoE 10 ... 56 V DC - Power ETH10-2WIRE-RX : 10 ... 56 V - Power The output PoE voltage is equal to the input voltage
Power consumption :
1.35 W (total)
Housing :
Plastic (PC)
"Index of Protection" :
IP20
Operation temp :
-25 °C ... 65 °C
Weight :
0.03 kg (single element)
Dimensions :
51 x 51 x 24 mm (single element)
Manufacturer / Brand :
ATTE
Guarantee :
3 years
PRESENTATION
Examples of connection diagrams:
1 mode:
Receiver without PoE power supply
2 mode:
The camera is powered from PoE via the 2-WIRE line. In such a configuration, attention should be paid to voltage drops in the 2-WIRE line. The PoE budget delivered to the camera depends on the diameter of the wires and the length of the cable used.
2 mode:
Powered by the power adapter. The camera is powered from PoE via the 2-WIRE line. In such a configuration, attention should be paid to voltage drops in the 2-WIRE line. The PoE budget delivered to the camera depends on the diameter of the wires and the length of the cable used. The ETH10-2WIRE transmitter and receiver will work properly in the 10-56V voltage range, but the camera connected to the receiver usually requires PoE power supply at 44-56V. These factors should be taken into account when selecting the power supply voltage of the ETH10-2WIRE-TX transmitter.
3 mode:
Local power supply at the camera. The camera is powered by PoE directly from the ETH10-2WIRE-RX receiver. The ETH10-2WIRE-RX receiver will work correctly in the DC IN 10-56V voltage range, however the camera connected to the receiver usually requires PoE power supply at 44-56V. These factors should be taken into account when selecting the power supply voltage of the ETH10-2WIRE-RX receiver. The ETH10-2WIRE-TX transmitter can, in this configuration, work with any PoE standard.
3 mode:
The camera is powered by PoE directly from the ETH10-2WIRE-RX receiver. The ETH10-2WIRE-RX receiver will work correctly in the DC IN 10-56V voltage range, however the camera connected to the receiver usually requires PoE power supply at 44-56V. These factors should be taken into account when selecting the power supply voltage of the ETH10-2WIRE-RX receiver. The ETH10-2WIRE-TX transmitter in this configuration can work with the DC IN 10-56V power supplied to the POWER connector.
Possible settings:
1 - 1 mode 2 - 2 mode 3 - 3 mode
FILES PACKAGE Dimensions (L x W x H): 125x85x53 mm Package: Carton Gross Weight: 0.088 kg
COMPONENTS OF WORKING WITH: ETH10-2WIRE-SET
Net: 0.00 HUF
Gross: 0.00 HUF
Weight: 0.00 kg
Especially recommended AHD, HD-CVI, HD-TVI HIDDEN CAMERA APTI-H50YK-37 2Mpx / 5Mpx 3.7 mm APTI Net: 11773.58 HUF
HDD FOR DVR HDD-WD11PURZ 1TB 24/7 WESTERN DIGITAL Net: 22075.47 HUF
SWITCH POE PFS3006-4ET-60-V2 4-PORT DAHUA Net: 18584.91 HUF
AHD MOBILE DVR ATE-D04SDEF-T2 4 CHANNELS AUTONE Net: 170415.09 HUF
CAMERA BRACKET DS-1280ZJ-DM18 Hikvision Net: 7452.83 HUF
SIDE MAGNETIC CONTACT KN-CA52 Net: 1886.79 HUF
SWITCH POE DS-3E0310P-E/M 8-PORT Hikvision Net: 42075.47 HUF
IP CAMERA IPC-HFW1530S-0280B-S6 5 Mpx 2.8 mm DAHUA Net: 77169.81 HUF
CONNECTION BOX PU-3D Net: 2025.47 HUF