Code: SP-58B
THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP-58B
Net: 145.92 EUR  Gross: 179.48 EUR
SP-58B
Product withdrawn from the offer
DESCRIPTION
Continuation of the product is: SP-58C

The SP-58B kit is a complete solution allowing to prepare practically every commonly used type of optical fiber to perform both mechanical and classical splice. In addition, the kit includes an optical power meter and a visual fault locator that allow to locate the place of fiber damage, as well as determine the quality of the splice.

ATTENTION! When using a laser source, avoid directing the laser beam towards the skin and eyes.

SPECIFICATION
Optical power meter:
Sensor type: InGaAs
Optical wavelength: 850 nm / 1300 nm / 1310 nm / 1490 nm / 1550 nm / 1625 nm
Power measurement range: 26  ... -50 dBm
Accuracy: ± 3 %
Measuring accuracy: 0.01 dBm
Connector type: FC, SC, ST
Main features:
  • The device is equipped with a 2.5mm universal connector with FC, SC, ST adapters
  • High durability tool, made from high quality materials
  • Automatic calibration after turned on
  • Wide measuring range
  • High measurement accuracy
  • Small dimensions
  • Battery charging
  • Small dimensions
  • Power supply: 3 x 1.5 V - Battery type LR3 (AAA) (not included)
    3 V DC (power adapter not included)
    Dimensions: 131  x 65  x 27 mm
    Laser fiber tester:
    Optical wavelength: 650 nm
    Optical output power: 1 mW
    Operation range: max. 5 km
    Operation modes:
  • CW - continuous light
  • GLINT - pulsating light (pulsation frequency: 2 Hz)
  • Application: Visual localization of the fiber damage
    Connector type: Universal
    Material: Aluminum - powder painted
    Main features:
  • The universal connector allows to connect all optical connectors of 2.5 mm standard, eg SC/FC/ST
  • High durability tool, made from high quality materials
  • Universal connector allows to test any fiber optic installation
  • The device works with both single-mode and multi-mode fibers
  • Small dimensions
  • The set includes a practical case
  • Power supply: 2 x 1.5 V - Battery type LR6 (AA) (not included)
    Dimensions: Ø 27  x 176 mm
    General information:
    In the kit:
  • Optical power meter,
  • Laser fiber tester,
  • Stripper for flat fiber optic cables,
  • Universal stripper for fibers,
  • Fiber optic cutter,
  • Container for isopropyl alcohol with a practical dispenser,
  • Measuring tape for fiber optic fiber diameter,
  • A practical bag that allows to conveniently and safely store and move tools
  • Main features:
  • Possibility to prepare all commonly used types of fibers for the splicing,
  • The kit is a complete solution and allows to start working immediately after unpacking
  • Weight: 1.2 kg (total)
    Dimensions: 250  x 200  x 155 mm (bag dimensions)
    Guarantee: 2 years
    PRESENTATION

    Optical power meter: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

     

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    connector: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    Laser fiber tester: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    Fiber optic cutter: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

     

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    Container for isopropyl alcohol with a practical dispenser: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    Stripper for fiber optic cables: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

     

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    Insulation stripper: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

     

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    In the kit: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    The tool set is housed in a handy bag: 

    THE TOOL KIT TO TERMINATE OPTICAL FIBER CONNECTORS SP 58B

    PACKAGE
    Dimensions (L x W x H): 250x200x160 mmPackage: N/AGross Weight: 1.214 kg