Code: AB1000
DRIVE FOR A SLIDING GATE AB1000 VIDOS
Net: 316.35 USD  Gross: 389.11 USD
AB1000
DESCRIPTION

The AB1000 electromechanical drive is designed for cooperation with sliding gates weighing up to 900 kg. Thanks to many technological facilities, the device is safe and comfortable to use.

Thanks to the built-in overload protection, if a gate collision with an obstacle is detected during closing, the drive will immediately stop and then open the gate. The automatic gate closing function allows to set the time from the total opening, after which the gate will close automatically. In addition, the drive automatically locks when movement is complete, preventing to open the gate manually. Thanks to this, there is no need to use additional devices protecting the gate against opening. In the case of drive or power failure, it is possible to manually release the lock using a key. The soft start and stop function smoothly adjusts the speed of the drive when starting and stopping the gate. It allows to significantly reduce overloads resulting from a sudden change in the gate's speed, which translates into longer life of the mechanical components of the drive and a reduction in the noise level.

The kit includes: photocell, magnetic limit switch and 2 remote controls.

SPECIFICATION
Drive type: For sliding gates
Engine power: 400 W
Maximum weight of the gate: 900 kg
Linear speed: 11 ... 13 m/min
Automatic closing of the gate:
Automatic locking of the drive:
Limit switch: Spring / Magnetic
Noise level during operation: ≤ 58 dB
Possibility of connecting the photocell:
Possibility of connecting the signal lamp:
Maximum number of programmed remote controls: 25 
Wireless transmission range: ≥ 30 m
Frequency bandwidth of the system: 433.92 MHz
Number of cycles per hour: ≤ 15 
Main features:
  • Smooth torque control allows to precisely set the force with which the drive will operate
  • Overload obstacle detection system - when an obstacle is encountered by the gate, the drive will stop immediately and then change the direction of the gate's movement
  • Soft start and stop function - smoothly reduces the speed of the drive when starting and stopping the gate
  • Wicket function - allows to partially open the gate and use it only as a wicket for pedestrians or cyclists
  • The automatic gate closing function allows to set the time from the total opening, after which the gate will close automatically
  • Power supply: 220  ... 240 V AC
    Housing: Plastic
    Color: Gray
    Operation temp: -20 °C ... 70 °C
    Weight: 11.3 kg
    Dimensions: 271  x 228  x 280 mm
    Manufacturer / Brand: VIDOS
    Guarantee: 2 years
    PRESENTATION

     

    DRIVE FOR A SLIDING GATE AB1000 VIDOS

    In the case of drive or power failure, it is possible to manually release the lock using a key: 

    DRIVE FOR A SLIDING GATE AB1000 VIDOS

     

    DRIVE FOR A SLIDING GATE AB1000 VIDOS

    Internal view of the housing: 

    DRIVE FOR A SLIDING GATE AB1000 VIDOS

     

    DRIVE FOR A SLIDING GATE AB1000 VIDOS

    Included, among others photocells: 

    DRIVE FOR A SLIDING GATE AB1000 VIDOS

    View after remove the cover: 

    DRIVE FOR A SLIDING GATE AB1000 VIDOS

    Kit contents: 

    DRIVE FOR A SLIDING GATE AB1000 VIDOS

    PACKAGE
    Dimensions (L x W x H): 340x280x360 mmPackage: CartonGross Weight: 14.784 kg