Electric Meters

Main features: Voltage tester function (one probe measurement using the contact placed on it) ;

Sensor: 1/2.8 " SONY Starvis™ Back-illuminated CMOS ; View angle: 68 ° ; Resolution: 1920 x 1080 ; Range of IR illumination: 5 m ; White light LED illuminator range: 5 m ; Temperature measurement range: 35 °C ... 42 °C ; Accuracy of temperature measurement: ± 0.3 °C ; Face recognition distance: 0.5 m ... 1.5 m (max 30 000 faces in the database) ; RS-485 interface; Wiegand interface; Alarm inputs / outputs: 0 / 2 ; Audio: Speaker built-in ; Power supply: 12 V DC ;

The controller is equipped with a wall mounting bracket; Sensor: 1/2.8 " SONY Starvis™ Back-illuminated CMOS ; View angle: 68 ° ; Resolution: 1920 x 1080 ; Range of IR illumination: 5 m ; White light LED illuminator range: 5 m ; Temperature measurement range: 35 °C ... 42 °C ; Accuracy of temperature measurement: ± 0.3 °C ; Face recognition distance: 0.5 m ... 2.3 m (max 30 000 faces in the database) ; RS-485 interface; Wiegand interface; Alarm inputs / outputs: 0 / 2 ; Relay output: NO, NC ; Audio: Speaker built-in ; Power supply: 12 V DC ;

Sensor: 1/2.9 " GC2093 ; View angle: 66 ° ; Resolution: 1920 x 1080 ; Cards support: 13.56 MHz S50 ; Range of IR illumination: 5 m ; White light LED illuminator range: 5 m ; Temperature measurement range: 35.7 °C ... 42 °C ; Accuracy of temperature measurement: ± 0.3 °C ; Face recognition distance: 0.5 m ... 2.0 m (max 30 000 faces in the database) ; RS-485 interface; Wiegand interface; Alarm inputs / outputs: 0 / 1 ; Audio: Speaker built-in ; Power supply: 12 V / 2 A DC ;

Frequency range: 950 ... 2150 MHz ; Signal level: -40 ... -10 dBm ; Powering from receiver: DC 13 V / 18 V ;

Frequency range: 950 MHz ... 2150 MHz ; Signal level: -40 ... -10 dBm ; Powering from receiver: DC 13 V / 18 V ;

Resolution: 1920 x 1080 ; Range of IR illumination: 5 m ; White light LED illuminator range: 5 m ; Temperature measurement range: 30 °C ... 50 °C ; Accuracy of temperature measurement: ± 0.1 °C ; Face recognition distance: 0.3 m ... 1.8 m ; RFID proximity reader built-in: 13.56 MHz S50 ; RS-485 interface; RS-232 interface; Wiegand interface; USB: 2 x USB 2.0 ; Alarm inputs / outputs: 2 / 2 - Relay outputs ; Audio: Speaker built-in ; Power supply: 12 V DC ;

Tested cables: STP / UTP cat. 5, 5e, 6, 6e - RJ45 (8P8C), RJ11 (6P4C), Coaxial cable ;

Tested cables: STP / UTP cat. 5, 5e, 6, 6e - RJ45 (8P8C), RJ11 (6P4C), Coaxial cable ; Main features: Test TDR 2.0 : Searching for a wire fault point, HD coaxial video level meter ;

The UT-107 is a digital car meter used to measure: voltage, current, resistance, frequency, equipped with additional functions useful in car diagnostics; Main features: 12V battery voltage test, Measurement of the closing angle of the DWELL circuit breaker, RPM x 10 rotational speed measurement, The following items can be checked: : the ignition coil, high voltage wires, Hall sensor, magnetoresistive sensor, Lambda probe, temperature sensor, position sensor, MAP pressure sensor, MAF air flow sensor ;

Main features: True RMS - accurate measurement of the RMS current and voltage for any waveform, , REL - relative measurement mode, Freezing the highest or lowest measurement, Hold - stopping the meter reading, ;

Main features: Freezing the highest or lowest measurement, Hold - stopping the meter reading ;

The device measures: voltage, current, frequency, resistance and capacity; Main features: True RMS - accurate measurement of the RMS current and voltage for any waveform, NCV - electric field detection function, REL - relative measurement mode, Writing the value MAX / MIN, Hold - stopping the meter reading ;

Main features: True RMS - accurate measurement of the RMS current and voltage for any waveform, NCV - electric field detection function, Hold - stopping the meter reading ;

Main features: True RMS - accurate measurement of the RMS current and voltage for any waveform, , REL - relative measurement mode, Freezing the highest or lowest measurement, Hold - stopping the meter reading, ;

Main features: True RMS - accurate measurement of the RMS current and voltage for any waveform, NCV - electric field detection function, REL - relative measurement mode, Writing the value MAX / MIN, Hold - stopping the meter reading ;

Main features: True RMS - accurate measurement of the RMS current and voltage for any waveform, , REL - relative measurement mode, Freezing the highest or lowest measurement, Hold - stopping the meter reading, ;

Main features: True RMS - accurate measurement of the RMS current and voltage for any waveform, NCV - electric field detection function, REL - relative measurement mode, Freezing the highest or lowest measurement, Hold - stopping the meter reading ;

The MM-UA9233D is a universal digital meter used to measure: voltage, current, resistance, capacity, frequency, temperature and checking the correct operation of diodes;

Automatic change of measuring ranges; Main features: Polarization index measurement (PI), Automatic power-off, ; Power supply: 6 x 1.5V, type AA/LR6/FR6 battery ;

Automatic change of measuring ranges; Main features: Polarization index measurement (PI), Automatic power-off, ; Power supply: 6 x 1.5V, type AA/LR6/FR6 battery ;

The meter UT-505A is a specialized device designed to measure insulation resistance in the range from 0.01MΩ to 20GΩ; Main features: Analog bargraph, Possibility to perform a comparative measurement, Polarization index measurement (PI), Measurement of dielectric absorption, Save to 99 measurement results in the device memory, True RMS - accurate measurement of the RMS current and voltage for any waveform ; Power supply: 6 x 1.5V, type AA/LR6/FR6 battery ;

Automatic change of measuring ranges; Main features: Bargraf, Possibility to perform a comparative measurement, Polarization index measurement (PI), Maximum duration of the measurement: 30 min, ; Power supply: 8 x 1.5V, type R14/LR14 battery, 15 V DC ;

Automatic change of measuring ranges; USB; Main features: Bargraf, Possibility to perform a comparative measurement, Polarization index measurement (PI), Maximum duration of the measurement: 15 min, ; Power supply: 8 x 1.5V, type R14/LR14 battery, 15 V DC ;

Automatic change of measuring ranges; USB; Main features: Bargraf, Possibility to perform a comparative measurement, Polarization index measurement (PI), Maximum duration of the measurement: 15 min, ; Power supply: 8 x 1.5V, type R14/LR14 battery, 15 V DC ;

The UT-801 is a digital laboratory meter used to measure: voltage, current, resistance, capacity, frequency, temperature and to check the correct operation of diodes; Power supply: 6 x 1.5V, type R14/LR14 battery, 9 V DC ;

The UT-803 is a digital laboratory meter used to measure: voltage, current, resistance, capacity, frequency, temperature and to check the correct operation of diodes; Power supply: 6 x 1.5V, type R14/LR14 battery, 220 V AC ;

The UT-8802E is a digital laboratory meter used to measure: voltage, current, resistance, capacity, frequency, and to check the correct operation of diodes; USB; Main features: Very high accuracy of measurements ; Power supply: 110 V AC / 120 V AC / 220 V AC / 240 V AC ;

Output voltage range of the power adapter: 0 ... 30 V ; Power supply output current range: 0 ... 3 A ; Output power: 195 W ; Number of outputs: 3 ; Main features: Possibility of serial or parallel connection of outputs ;

Output voltage range of the power adapter: 0 V ... 30 V ; Power supply output current range: 0 A ... 3 A ; Output power: 96 W ; Number of outputs: 1 ;

Measurement range: 100 m ; Continuous measurement; Area measurement; Volume measurement; Measurement of the cathetus; Measurements using the Pythagorean theorem; Section measurement; Add/subtract function;

Measurement range: 120 m ; Continuous measurement; Area measurement; Volume measurement; Measurement of the cathetus; Measurements using the Pythagorean theorem; Section measurement; Add/subtract function;

Temperature measurement range: -35 °C ... 650 °C ; Accuracy of temperature measurement: ≤ 0 °C : ± 1.8 °C, > 0 °C : ± (10% + 1.8) @ 1 °C ; Measurement resolution: 0.1 °C ;

MM-UA6 is a universal digital meter used to measure: voltage, resistance, capacity, temperature and checking the correct operation of diodes; The meter has the function of automatic change of measuring ranges; Main features: Flashlight built-in Large, easy to read LCD graphic display with backlight, ;

RB-30C is a universal digital meter used to measure: voltage, current, resistance, temperature, hFE, diodes;

RB-33C is a universal digital meter used to measure: voltage, current, resistance, temperature, diodes;

The RB-830 is universal digital multimeter designed to measurement of: voltage, current, resistance, hFE, diodes;

RB-838 is a universal digital meter used to measure: voltage, current, resistance, temperature, hFE, diodes;

The UT-118B is a universal digital meter used to measure: voltage, current, resistance, diodes; Main features: EF function - enables non-contact voltage detection eg in wires, in the range of 50V ... 400V ;

The UT-131B is a universal digital meter used to measure: voltage, current, resistance, diodes; Main features: Measurement of the battery discharge level: 12V, 9V, 1.5V ;