Top CCTV Equipment  Keyboards and Controllers  Motor Units and MotoZoom Lenses Drivers and Controllers Code: SOT-5
a A A

MOTOR UNIT DRIVER SOT-5

MOTOR UNIT DRIVER SOT 5
Net: 25.77 EUR  Gross: 25.77 EUR

Product withdrawn from the offer
- Add to the product list to compare
DESCRIPTION

The SOT-5 motor unit driver is designed to cooperation with pan/tilt motor units and motozoom lenses. The driver executes the commands from devices with RS-485 telemetry transmitter, eg control panels, DVRs, video capture cards, video servers. The device casing is designed to outdoor mounting to a wall or to a mast with a tie.

ATTENTION! Switch the power off during cables connecting.

SPECIFICATION
Number of operating motor units: 1 pcs
Camera power output: 12 V DC / 0.4 A
Current consumption in waiting mode: 50 mA
Maximal current load of directions outputs: 0.5 A
Maximal current load of ZOOM, FOCUS outputs: 0.1 A
RS-485 transmission baud rates: 2400, 4800, 9600 bps
Available protocols: Pelco-D, Pelco-P, Delta-M
Short-circuit outputs protection:
Motor unit control:
  • right
  • left
  • down
  • up
  • right down
  • right up
  • left down
  • left up
  • autoscan
    • Camera control:
  • Zoom - focal length adjustment
  • Focus - sharpness adjustment
    • Control socket type: terminals
    Power socket type: terminals
    Power supply: 24 V AC
    Weight: 0.11 kg
    Dimensions: 112  x 37  x 91 mm
    Guarantee: 2 years
    PRESENTATION
     
    MOTOR UNIT DRIVER SOT 5
    The picture below shows the jumpers settings for ID number and protocol: 
     
    MOTOR UNIT DRIVER SOT 5
    A) ID NUMBER
    B) PROTOCOL
    C) For the purpose of service
    D) TEST. When switched to the test function, the controller turns on two seconds, by one, all the possible voltage at each of its outputs. Thus, when properly connected, the rotator moves on two seconds up, down, left, right, etc. Test function allows us to check the driver and the connections between the rotator and the lens.
    The driver connector description: 
    MOTOR UNIT DRIVER SOT 5
    1) Zoom
    14) To the camera (12V DC power supply)
    13) To the transmission line
    12) To the motor unit
    11) To the camera lens
    10) ground
    9) common
    8) Twisted-pair cable (1 pair)
    7) left
    6) up
    5) down
    4) auto
    3) Focus
    2) ground
    15) To the 24V AC power adapter
    FILES
    Data Sheet
    100 KB
    CE
    250 KB
    Manual EN 
    194 kB
    Pelco Controller EN 
    374 kB
    Pelco-P commands listing implemented in SOT-5 driver EN 
    54 kB
    PACKAGE
    Dimensions (L x W x H): 120x65x30 mmPackage: CartonGross Weight: 0.080 kg

    COMPONENTS OF WORKING WITH: SOT-5
    AC POWER SUPPLY ADAPTER 24V/3A/AC
    24V/3A/AC
    Net: 47.53 EUR
    TWISTED-PAIR CABLE UTP/K5/305M/SET
    UTP/K5/305M/SET
    Net: 0.35 EUR
    TWISTED-PAIR CABLE UTP/K5/305M/ZEL
    UTP/K5/305M/ZEL
    Net: 0.43 EUR